Aplus Finetek Sensor, Inc. is pleased to announce the introduction of the JTR Series Guided Wave Radar Level Transmitter. Using state-of-the-art TDR technology, the JTR continuously measures the changing level of each of two liquids of differing specific gravity, within the same tank. The JTR features a 2-wire loop power supply and provides an independent 4-20mA output for each the top and bottom fluid levels. The JTR can also be equipped with HART 7.0. Alternately the JTR can be provided in a 4-wire design when RS485 MODBUS communications is required, with either one 4-20mA output or with two 4-20mA outputs when being used for interface measurement applications. The JTR is also a very cost effective and reliable unit.
Aplus Finetek Sensor, Inc. is pleased to announce the availability of its latest new product, the SC35 series vibrating fork point level sensor using ultra-ow density detection technology. The SC35 series uses state-of-the-art piezoelectric crystal and electronic technology to design and manufacture a point level sensor that does not require any calibration and can detect solids with a density as low as 0.624lbs/ft3!
Aplus Finetek Sensor, Inc. is pleased to announce the availability of its SE3 Series Compact Rotary Paddle Bin Level Indicator for point level switch applications of bulk solids, including powder and granular materials. Aplus Finetek Sensor is the manufacturer of this device, which is the most compact rotary paddle unit featuring a powder coated aluminum enclosure rated IP65 and NEMA 4X, and available local LED indication. The SE3 compact rotary paddle unit is economical and available in a variety of configurations; including Standard, High Temp and Reinforced Shaft Extended versions to handle a wide variety of applications broadly across many industries.
Aplus Finetek Sensor, Inc. is pleased to announce the availability of its latest new product, the SAL18 series RF admittance point level switch. The SAL is an advanced RF level switch, at an affordable price. The SAL eliminates problems associated with product build-up on the sensor probe and makes setup quick and easy with pushbutton calibration. Application control is enhanced with the independent adjustable time delay on material presence and material absence detection.
Aplus Finetek Sensor, Inc. is pleased to announce the introduction of the EPR Series Paddlewheel Flowmeter. Using proven magnetic paddlewheel technology and state-of-the-art electronics, the EPR continuously measures the flow of liquids in pipes with a velocity range of 0.98ft/s~32.8ft/s (0.3m/s~10.0m/s) in pipe sizes from ¾” through 2” (DN20 to DN50). The EPR will work in applications where fluid is clean, up to impurity level of 1% with particle size up to 0.5mm. The EPR key features include its cost effect and reliable technology, choice of output, built-in RS485 MODBUS serial link and choice of materials.
Aplus Finetek Sensor, Inc. is pleased to announce the introduction of the JTR Series Guided Wave Radar Level Transmitter. Using state-of-the-art TDR technology, the JTR continuously measures the level of powders, granular and liquid materials within bins, silos and tanks. The JTR features an easy-to-install 2-wire loop power supply and provides a 4-20mA output which changes with material level. It is very cost effective and reliable.
Many processes of bulk solid materials require dust collection to keep production areas safe and clean as well as to reclaim material. Dust collection systems are commonly used in these situations. In a wood working system a dust collection system was manufactured using a 55 gallon drum as the collector. To keep the drum from overfilling and to prevent the dust from backing up into the system, a compact rotary paddle bin level indicator has been successfully used.
Aplus Finetek Sensor, Inc. is pleased to announce the availability of its newest product line, the PS Series of proximity switches. The PS line includes both inductive and capacitive style proximity sensors in many popular sizes and configurations. The PS series offers low cost and high reliability backed by a limited lifetime warranty.
Aplus Finetek Sensor, Inc. is pleased to announce the availability and use of the EG series liquid level transmitter. Consisting of the EG31, EG32, EG34 for use in ordinary locations and the EG36 and EG37 for use in hazardous explosionproof areas, the EG employs the use of magnetostrictive technology to precisely and reliably measure the continuously changing level of a wide variety of fluids. Accurate liquid level transmitters are important for precise control of a wide range of processes.
Aplus Finetek Sensor, Inc. is pleased to announce the availability of its bulk solids flow aids, including a line of pneumatic industrial vibrators, the B series, and a line of aerators pads the RA series. Consisting of pneumatic Piston and Rotary styles, the B series pneumatic industrial vibrators are cost-effective and reliable devices for assisting the discharge of bulk solid materials from bins, hoppers and silos. The RA is a rectangular aerator pad, and is the standard in concrete batching plants.