-
SAL Series RF Admittance Point Level Sensor
The SAL Series is an RF admittance point level sensor comprising of an active probe section, guard section and grounding section with insulation sleeves between the sections. The SAL RF admittance point level sensor monitors for the presence and absence of a liquid, bulk solid or slurry material by detecting the change of admittance between the active and grounding sections, which is caused by the change from material presence to absence or the reverse. The SAL includes two versions, the SAL18 and SAL17. The SAL18 is the most advance and includes pushbutton calibration for simplified installation and setup.
Read More -
SCL Series Capacitance Point Level Sensor
The SCL Series is a capacitance point level sensor used for high, low and intermediate level detection of liquids and dry free-flowing solids. It detects the change in capacitance around the probe of the capacitance point level sensor and provides an output to indicate presence or absence of material.
Read More -
SC35 Series Vibrating Fork Point Level Sensor
The SC35 Series is a vibrating fork point level sensor or tuning fork level switch, specifically designed to detect the presence and absence of a broad range of powder and bulk solid materials, including settled solids in an aqueous liquid. It is ideal for materials with density from 0.624lbs/cubic-foot (10g/l) and up.
Read More -
SVP Series Vibrating Rod Point Level Sensor
SVP Series vibrating rod point level sensor is designed to detect the presence and absence of powder and bulk solid materials of moderate to heavy weight. The SVP vibrating rod point level sensor requires no calibration, is easy to install and setup.
Read More -
SE3 Series Compact Rotary Paddle Point Level Sensor
The SE3 Series compact rotary paddle point level sensor is a bulk solids bin level indicator or level switch that uses a robust synchronous drive motor to rotate a stainless steel shaft at approximately 1 RPM. It is small and compact, a great choice for installations with limited space.
Read More -
-
EE300 Series Electromechanical Inventory Level Measuring System
The EE300 Series is an electromechanical inventory level measuring system which uses state-of-the-art third generation weight & cable technology to periodically measure the level of liquid and bulk solid materials held in storage. The EE300 series level measuring system includes the EE300 sensor and available RCU remote control unit or MMS-TL PC-software.
Read More -
EB Series RF Admittance Level Transmitter
The EB5 Series is an RF admittance level transmitter that continuously measures the changing level of a powder, granular or liquid material within a containment vessel. The RF admittance level transmitter measures the changing capacitance between the sensing probe and the reference ground (reference probe or metal wall of the vessel) to determine the level of the material in the vessel.
Read More -
JFR Series Radar Level Transmitter
NOW AVAILABLE FOR LIQUID AND GRANULAR MATERIAL MEASUREMENT!
The JFR Series is a open-air radar level transmitter designed for measuring the changing level of liquids, slurries and bulk solids in tanks, bins and silos. Operating at either 10GHz or 26GHz the JRF series radar level transmitter products will provide non-contact continuous level measurement with high accuracy and reliability.
Read More -
EST Series Grain Storage Temperature and Level Monitoring System
The EST Series is a grain storage temperature and level monitoring system consisting of the EST110 and EST120 sensors and MMS-TLA PC-software. The EST110 sensor cable is for temperature sensing only, the EST120 is for temperature/level monitoring from a single cable. Simplified installation and start-up using 1-wire digital temperature sensors. More cost-effective than thermocouple based systems. Wireless or hardwired.
Read More -
-
SRS/SRT/ED Series Belt Conveyor Safety Products
The SRS/SRT/ED belt conveyor safety products use various electromechanical and electronic technology to protect equipment and personnel. These safety devices include:
– SRT belt misalignment switch
Read More
– SRS safety stop switch
– ED series speed monitor -
BRD/BDV/AE Series Dust Collector Valves and Controllers
The BRD/BDV series are used specifically as dust collector valves in dust collector systems. Each valve consists of two air chambers divided by a diaphragm. The two models, BRD and BDV, perform the same function with slightly different designs. They are used to provide a sudden burst of air pressure into dust collector filter bags for cleaning purposes.
The AE series is a product line consisting of several dust collector controllers used to sequence and control the operation of the dust collector valves.
Read More -
RA/B Series Aerators and Industrial Vibrators
RA Series is a rectangular style bin aerator, used primarily in concrete production plants to fluidize cement powder and flyash. These cost-effective and reliable aerators can be used to aerate or fluidize most powders.
BV Series is a group of pneumatic industrial vibrators of the piston and rotary types. The rotary industrial vibrators include ring, ball and turbine types.
Read More -
-
JTR Series Guided Wave Radar Level Transmitter
The JTR series is a guided wave radar level transmitter using TDR technology to generate a continuously changing 4-20mA signal representing measured level for liquids, bulk solids and slurry materials in a wide range of industries and applications. It is cost effective and very reliable.
Read More