BA Series
BA Series
Air Hammer
BA Series Air Hammer
A Highly strengthened aluminum body
A Low frequency / continuous impact model and sudden activation and deactivation is allowed Frequency.
An Amplitude of impact can be adjusted as required.
A Direct impact onto target object, to produce the optimum vibration feedback.
Material characteristic(moisture, S.G., size..) and equipment design (shape, layout...) are usually the causes of medium accumulation in the pipes and tanks. By applying pneumatic vibrators in the problem area, it will provide the best solution. Pneumatic vibrators will shake off the clogged or attached material and eliminate friction during automatic production.
The single impact model of Air Hammer imparts on one specific target spot on limited target. Air Hammer impact will not separate water out of humid mixtures. It is often applied onto pipe or elbow clean and tank filled with humidity or small S.G. Material.
1. One impact wave per one shot.
2. Highly strengthened aluminum structure.
3. Impact force and interval timing can be set by request.
4. Extended magnetic strength to increase piston impact power.
- Temperature: -40~100°C
- Noise level range: 80-115 dBA
- One impact wave per one shot.
continuous impact model, sudden activation/
of impact can be adjusted as required:
Direct impact onto target object to produce the optimum vibration feedback.
Highly strengthened aluminum body Low frequency/ continuous impact model, sudden activation/ deactivation is allowed Frequency.
Amplitude of impact can be adjusted as required:
Direct impact onto target object to produce the optimum vibration feedback.
Direct impact onto target object to produce the optimum vibration feedback.
Direct impact onto target object to produce the optimum vibration feedback.
Dt onto target objtion feedback.
Diproduce ton feedback.
Directoduce the optimum vibration feedback.
Drget object to prodce optimum vibration feedback.
